4-7
Confidential
1.10 Acquire white/black level data (Maintenance mode 55)
Acquire white/black level data, referring to Chapter 5, Section 1.3.17.
1.11 Adjustment of software correction for inclination/corrugation/ruled lines
(Maintenance mode 65)
Refer to Chapter 5, Section 1.3.23.
1.12 Updating of paper feeding correction values (Maintenance mode 58)
Refer to Chapter 5, Section 1.3.19.
1.13 Adjustment of margins in borderless printing (Maintenance mode 66)
Refer to Chapter 5, Section 1.3.24.
1.14 Reset purge and flushing counts
(1) Switch the machine to the maintenance mode.
(2) Press the 8 and 0 keys in this order.
(3) Press the key several times until the purge (or flushing) count appears on the
LCD.
(4) Press the 2, 7, 8 and 3 keys in this order to reset the purge (or flushing) count.
(5) When the count is reset, the machine automatically returns to the initial stage of
the maintenance mode.
Once the purge count reaches 12,200, and the flushing count reaches Black:
406,653,747 and Colors: 507,105,943, a message “Unable to Print 46” is displayed,
and the execution of both the purge operation and the flushing operation is prohibited.
If this occurs, it is required to replace the ink absorber box or the flushing box with new
ones, and reset the purge count or the flushing count in the steps described above.
1.15 Write head calibration data (Maintenance mode 02)
Write head calibration data, referring to Chapter 5, Section 1.3.2.
To Next Page
Loading...
Need help?
General
