5-29
Confidential
(4) Press the Mono Start key.
The "********.msd" appears on the LCD. The "********" is unique to each model.
(5) Press the Mono Start key.
The "Import from Card" or "Import all" appears on the LCD again.
(6) Press the Mono Start key.
The "Please wait" appears on the LCD.
Note: Never remove the external memory from the machine when importing is in
progress.
(7) Wait for the machine to automatically return to the initial stage of the maintenance
mode and show "**** Active" on the LCD. Remove the external memory from the
machine and keep it in a safe place.
Note: If any of the error messages shown in "Backup Procedure" appears, press the X
key to return the machine to the initial stage of the maintenance mode.
1.3.14 Setting of Country/Language (Maintenance mode 52)
< Function >
Machines have been customized for their destination countries with the corresponding
EEPROM customizing codes (see Section 1.3.27, Maintenance mode 74). However,
some customizing codes are shared by two or more destination countries, so the
machines customized by these codes require further specifying individual destination
countries or languages.
Note: This function applies to "Pan-Nordic," "Oceania," "Italy and Iberia," and "Turkey
and Gulf" only.
< Operating Procedure >
(1) Press the 5 and 2 keys in this order in the initial stage of the maintenance mode.
Wait for the "Press OK key" to appear on the LCD, then press the SET key.
(2) Select the country name of the user with the and keys and press the SET key
to display "1.Yes 2.No."
(3) If the choice is correct, press 1.Yes.
The machine displays "ACCEPTED" on the LCD, saves the new setting, and
returns to the standby state.
To Next Page
Loading...
Need help?
General
