5-55
Confidential
1.3.28 Move of the Head/Carriage Unit to the Flushing Position (Maintenance mode 75)
< Function >
This function is used to remove paper particles and dust accumulated between the
maintenance unit and head/carriage unit. Using this function moves the head/carriage
unit to the flushing position, allowing you to easily remove the paper particles and dust
accumulated.
< Operating Procedure >
(1) Press the 7 and 5 keys in this order in the initial stage of the maintenance mode.
The "PLS OPEN COVER" appears on the LCD.
The head/carriage unit moves to the flushing position.
(2) Open the scanner cover.
The "PLS CLOSE COVER" appears on the LCD.
(3) Remove the paper particles and dust accumulated.
(4) Close the scanner cover.
The head/carriage unit moves back to the home position and the machine returns
to the initial stage of the maintenance mode.
TIP: Holding down the X key with the document scanner unit opened for at least
five seconds can also move the head/carriage unit in the same manner as above.
To Next Page
Loading...
Need help?
General
