Delta DVS Series User Manual

Chapter 3 Featured Functions
3-117
Description Factory Default
Link Status
This field displays the status of the interface link. Up or Down
Admin Status
Specify the status and direction of the interface:
 TX: The interface processes outgoing traffic only.
 RX: The interface processes incoming traffic only.
 TX and RX: The interface processes both incoming and outgoing
traffic.
 Disabled: The interface is disabled.
TX and RX
Notification Status
Specify the notification status:
 Enabled: Notifications are sent.
 Disabled: Notifications are not sent.
Disabled
3.13.1.3 LLDP TLV Options
You can configure LLDP type-length value (TLV) settings for each interface in this page.
Item Description
Port Specify the interface number.
Port Description
System Name
System Description
System Capability
MAC PHY Config
Management Address
Specify whether to send the options in LLDP frames.
 Enable: The information is transmitted. This is the default
setting.
 Disable: The information is not transmitted.

Delta DVS Series Specifications

General

Brand	Delta
Model	DVS Series
Category	Switch
Language	English