Chapter 3 Featured Functions
3.9.1.1 LAG Membership
When the static mode of the port-channel is enabled, it does not transmit or receive LACPDUs. Ex.
The member ports do not transmit LACPDUs and all the LACPDUs which are received may be
dropped. The factory default is disabled, which means the port-channel is dynamic.
If you want to enable the static mode of a LAG on the Delta switch, make sure the static mode of a
LAG of the other switch which connects to the Delta switch is enabled, too.
Item Description
LAG ID Select the LAG ID from the drop down list.
Static Mode Specify whether the static mode of the LAG ID is enabled.
Port
Select one or more interfaces by clicking the square or click for the
second time to clear the interface.
3.9.1.2 LAG Information
The LAG information is displayed in this page.
Item Description
LAG ID This field displays the LAG identifier.
Static Mode The field displays whether the static mode is enabled.
Configured Ports The field displays which ports has been configured to the LAG ID.
Active Ports The field displays the active ports.
LAG State The field displays whether the LAG state is up.
3.10 Access Control List
Access control lists (ACLs) can make sure that only authorized devices have access to specific
resources when any unauthorized devices which are blocked attempt to access network resources.
ACLs provide security for the network, traffic flow control, and determine which types of traffic can
be forwarded or blocked.
Delta switch supports ACLs based on the MAC addresses of the source and destination devices
(MAC ACLs).
3-75
To Next Page
Loading...
Need help?
General
