Delta DVS Series User Manual

DVS Series Managed Industrial Ethernet Switches User’s Manual
3.1 Basic Setting
The basic setting group includes most common settings, and an administrator can maintain control
the Delta switch in this group.
3.1.1 System Information
Some information of switch status items and versions are displayed in the banner of GUI. The
information can help the administrator identify the switch in the network.
Switch Status
Description Factory Default
System Name
Input the system name of the switch. None
System Location
Input the system location of the switch. None
System Contact
Input the system contact of the switch. None
Serial Number
The serial number of the switch. Fixed
System Object ID
The base object ID for the Management Information Base (MIB) of the
switch.
Fixed
IMPORTANT:
Make sure that you save the configuration in the Save
Configuration page after you have applied the configuration
changes. (Save ConfigSave Configuration) If you don’t
save the configuration, then the configuration will be cleared
after the switch is rebooted.
3-4

Delta DVS Series Specifications

General

Brand	Delta
Model	DVS Series
Category	Switch
Language	English