Chapter 3 Featured Functions
3.1.8.4 Telnet Configuration
You can configure Telnet configuration in this page.
Telne
t Configuration
Description Factory Default
Telnet Admin Mode
Specify the status of Telnet.
Disable: Telnet is disabled.
Enable: Telnet is enabled.
Enable
Telnet Session Timeout (minutes)
The Telnet session time-out period in minutes. When there is no activity
and the time-out period is reached, the Telnet session will be closed.
The period must be in the range of 1 to 160 minutes.
30
Maximum Number of Telnet Sessions
The maximum number of inbound Telnet sessions that are allowed on
the switch. The number must be in the range of 0 to 5.
5
Current Number of Telnet Sessions
This field displays the number of simultaneous Telnet sessions. 0
3.1.8.5 Console Port
You can configure console port configuration in this page.
Console Port
Description Factory Default
Console Login Timeout (minutes)
The console port session time-out period in minutes. When there is no
activity and the time-out period is reached, the console port session is
closed. The period must be in the range of 0 to 160 minutes. Entering 0
disables the time-out.
30
3-31
To Next Page
Loading...
Need help?
General
