Delta DVS Series User Manual

DVS Series Managed Industrial Ethernet Switches User’s Manual
SNTP Unicast Server Configuration
Description Factory Default
Forward Address Type
Specify the type of SNTP server IP address:
 IPv4: Use an IPv4 address to recognize an SNTP server. This is the
default setting.
 IPv6: Use an IPv6 address to recognize an SNTP server.
 DNS: Use FQDN to recognize an SNTP server.
IPv4
Unicast Server IP Address
Enter the server IPv4, IPv6 address or host name (FQDN). (Depend on
which type you select in the Forward Address Type field.)
None
Unicast Server Type
Specify the type of server by selecting Primary or Secondary from the
drop-down list.
None
Last Updated
This field displays the last time the SNTP unicast server updated its
time information.
None
Tx Requests
This field displays the number of SNTP transmit requests made by the
switch since it was last rebooted.
None
Note:
We recommend you add SNTP unicast server for Delta switch to synchronize the
time. It can make sure the time on Delta switch is accurate.
3.1.5 DHCP/BootP Settings
The switch can function as a DHCP server, DHCP relay and DHCP L2 relay. If there is no DHCP
server in your network, then you can enable a DHCP server function. If there is a DHCP server in
your network, then you can configure a switch to function as a DHCP relay. If there are already a
DHCP server and a DHCP relay in your network, or there are L2 devices between DHCP clients and
relay agents, then you can configure the switch to function as a DHCP L2 relay in this network.
3-12

Delta DVS Series Specifications

General

Brand	Delta
Model	DVS Series
Category	Switch
Language	English