3 Copy
118
Copy
3
Handout Tray
Allows you to select the paper tray to be used for the handouts.
Select [More] to display the [Paper Supply - Handout] screen on which you can select
a tray.
Note • For [Handout Tray], select one of the paper trays. Auto Paper Select feature is not available.
• The paper tray that you selected for [Transparency Tray] cannot be selected for [Handout
Tray] at the same time.
Copy Output (Specifying Finishing Options)
This feature allows you to select finishing options.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
If the finisher is installed, each set of copies can be stapled, and then output. The output
destination is automatically selected depending on the selected feature. For the
machine with the Finisher D4 with Booklet (optional), when [Fold & Staple] for [Booklet
Creation] or [Single Fold] for [Folding] is selected, outputs are delivered to the booklet
tray.
1 Select [Copy Output].
2 Select any option.
Auto
Copies are collated when the originals are loaded in the document feeder. Copies are
also collated when originals are loaded on the document glass and any of the following
features is used: 2 Sided Book Copying, Covers, [Blank Separators & Handouts] or
[Transparency Set & Handouts] of Transparency Options, Booklet Creation, Stapling,
Build Job, Sample Set, and Combine Original Sets.
Collated
The machine outputs sheets sorted into sets that are arranged in page order.
Uncollated
The machine outputs the specified number of copies and sorts sheets by page.
Uncollated with Separators
The machine outputs copies with inserting blank sheets as a separator and sorts
sheets by page.
Separator Tray
When you select [Uncollated with Separators], select the paper tray to be used for the
separators.
CAUTION
z
Waste staples may come out with output paper. Be careful not to get injured by the
staples.
Do not staple punched holes of paper. Sharp points of a staple may cause injuries.