Scan
4
4 Scan
200
z
Sideways Images
Select this option when placing the top edge of the document against the left side of
the document glass or document feeder.
Reduce/Enlarge (Specifying a Scanning Ratio)
This feature allows you to set the scanning ratio for the document to be scanned.
Note • When [Searchable Text] is set to [Searchable], [Reduce/Enlarge] is [100%].
1 Select [Reduce/Enlarge].
2 Select any option.
îš„Proportional %
Allows you to select a preset ratio, or enter a value in the range from 25 to 400% in 1%
increments.
Use the numeric keypad or [+] and [-] to enter a value.
z
Variable %
Enter the scanning ratio. Specifying "100%" scans at the same image size as the
original document.
z
Preset %
Select from preset ratios.
You can change the default values of scan ratios other than [100%]. For information on the settings,
refer to "5 Tools" > "Scan Service Settings" > "Reduce/Enlarge Presets" in the Administrator Guide.
îš„Enter Output Size
In [Output Size], select the output size of the
scanned document. The machine
automatically calculates the scanning ratio
based on the selected output size and the
original document size.
Note • Selecting [Enter Output Size] may
generate blank margin areas.
To Next Page
Loading...
Need help?
General
