Store to WSD
187
Scan
4
6 [Store to WSD - Remove Your Originals]
screen appears on the touch screen after a
scan job has been completed. Remove the
originals from the document glass and then
select [OK].
Note • If the standby screen is not displayed, a
scan job will not be started even when the
network computer recognizes the
machine.
• Select [Delete] button to abort an operation. After an operation is aborted, [Store to WSD -
Remove Your Originals] screen is displayed on the touch screen.
• The machine will not enter the Energy Saver mode while the standby screen is displayed .
For information on Energy Saver mode, refer to "Energy Saver Mode" (P.39).
This Device (Storing Data Scanned by the Machine on a Network
Computer)
You can forward the data scanned with the command from the machine to a specified
computer on the network.
Note • WSD stands for Web Services on Devices.
1 Load the document on the document glass
or in the document feeder, and select [This
Device].
2 Computer names and 5 processing methods
are displayed in the [List of Computers].
Select destination from the list in accordance
with the intended use.
îš„List of Computers
Lists destination and URL.
Note • Select from among 4 kinds of processing methods (Scan to PC, Scan for Print to PC, Scan
for E-mail to PC, Scan for OCR to PC) in accordance with the intended use.
3 Press the <Start> button.
<Start> button
To Next Page
Loading...
Need help?
General
