Operations during Copying
57
Copy
3
îš„If [Delete] does not appear on the screen:
1 Press the <Job Status> button.
2 Select the job to cancel.
Note • Select [ ] to return to the previous
screen or [ ] to move to the next screen.
3 Select [Delete].
4 Select [Delete].
Changing the Number of Copies
To change the number of copy sets during scanning or copying, use the following
procedure.
1 Press either the <Stop> button on the control
panel or [Delete] on the touch screen.
<Job Status> button
<Stop> button
To Next Page
Loading...
Need help?
General
