Output Format
121
Copy
3
Paper Size and Punching Position
ID Card Copy (Copying Both Sides of an ID Card)
This feature allows you to copy both sides of a small undetectable original, such as an
ID card, onto one side of paper.
1 Specify the orientation of the document in
[Original Orientation] on the [Layout
Adjustment] screen.
2 Place the document slightly away from the top left corner of the document glass, and
close the document glass.
Important • Always use the document glass when copying. You cannot use the document feeder with
this feature.
• Specify the orientation of the original document correctly.
• If the edges of the image are missing, slightly move the card inward on the document glass
so that the whole image can be scanned.
• When the reduced size is specified to copy an ID card, the machine may copy the ID card in
a different orientation from the original orientation depending on the magnification ratio
specified. For information on the copy magnification ratio for ID Card Copy, refer to "5 Tools"
> "Copy Service Settings" > "Copy Control" > "ID Card Copy - Reduce/Enlarge" in the
Administrator Guide.
For information on how to specify the orientation of a document, refer to "Original Orientation
(Specifying the Orientation of Loaded Documents)" (P.87).
2 / 4 Holes 2 / 4 Holes
Top
2 / 4 Holes
Right
A4 , B5 , 8.5 x 11" , 16K
A4, A3, B4, 8.5 x 14"
, 11 x 17", 8K
Original document
Front side
Back side
Original orientation
Copied output
Front side
Back side
To Next Page
Loading...
Need help?
General
