Deleting Information from Stored Programming
163
Stored Programming
7
Deleting Information from Stored Programming
This section describes how to delete information from Stored Programming.
1 Press the <Menu> button
2 Select [Setup Menu].
3 Select [Stored Copy Program], [Stored Scan
Program] or [Stored Multi-Job Program].
4 Select the number to delete, and press [Create/
Edit].
Note • Select [ ] to display the previous screen and
select [ ] to display the next screen.
• Entering a 2-digit number in the [Go to] field
specifies a Stored Programming number.
5 Press the [Delete] button.
6 Select [OK] to delete.
Important • Deleted data cannot be restored.
Note • Select [Cancel] to cancel the deletion of Stored
Programming job data.
7 Press [Close] until the [Menu] screen is
displayed.
Menu
Copy
Scan
Stored
Programming
Setup Menu
Language
Please select the required service.
Close
Setup Menu
Stored
Copy Program
Stored
Scan Program
Stored Multi-
Job Program
Mailbox
Program
Distribution
(01 40)
01.
02.
03.
04.
05.
Job 01
Job 02
Job 03
(Not Entered)
Job test
Stored Copy Program
Go to
Create
/ Edit
Close
Page 1 of 8
# Name
Stored Copy Program 02
Close
Items
1.Name
2.Settings
Current Settings
Job 02
---
Delete
OK Cancel
Stored Copy Program - Delete
Stored Program 02:Job 02
will be deleted.
Select OK if you want to delete.
To Next Page
Loading...
Need help?
General
