11System Settings
230
System Settings
11
Original Type buttons - 1st, 2nd, and 3rd buttons
Select from [Text/Line], [Text/Photo], [Picture], [Photo], [Blueprint], and [Transparent].
[System Settings]>[System Settings]>[Copy Settings]
Copy Defaults
This screen allows you to set the default values
for the copy feature.
These default settings take effect when the
power is turned on or the machine returns from a
power-saving mode, or when the <Clear All> but-
ton is pressed.
By setting the defaults to commonly used fea-
tures, you can simplify your copy operations.
The following items can be set:
Allows you to set the document type to be displayed
next to the first, second and third buttons under
[Original Type] in the [Image Quality] screen.
Factory default value:
z
1st: [Text/Line]
z
2nd: [Text/Photo]
z
3rd: [Picture]
Items Notes Factory
Default
Default Mode
(Auto R/E)
Set whether to display the [Basic Copy (Auto
Mode)] screen as the default screen instead of the
[Basic Copy] screen whenever the copy function is
selected.
Off
Reduce/Enlarge Set the default value for [Reduce/Enlarge] on the
[Basic Copy] screen.
Select the magnification from the six buttons reg-
istered as R/E buttons, [100%], and [Auto %], a
total of eight types.
When the default setting for [Media Supply] is
[Auto Select], you cannot set [Auto %] for
[Reduce/Enlarge].
See • For details of how to set the preset ratio
buttons, refer to "Reduce/Enlarge Buttons"
(P.233).
100.0%
Media Supply Set the default value for [Media Supply] on the
[Basic Copy] screen.
When the default setting for [Reduce/Enlarge] is
[Auto %], you cannot set [Auto Select] for [Media
Supply].
Auto Select
Original Type Copy Density
Text/Line
Text/Photo
BG. Suppress.
Auto
(0)
Picture
2
1
Auto R/E
Basic
Copy
Image
Quality
More
Features
Copy Defaults
Page
1 of 7
On
100.0%
Auto Select
Bond
Standard
1.Default(Auto R/E)
2.Reduce / Enlarge
3.Media Supply
4.Media Type
5.Media Cut Mode
Close
Items Current Settings
To Next Page
Loading...
Need help?
General
