Copy Settings
235
System Settings
11
Set the length on a size by size basis within the
range of 210 to 15000mm.
The factory default values are as follows:
z
ISO A0, A1, A2, A3: 1189, 841, 594,
420mm
z
JIS B1, B2, B3: 1030, 728, 515mm
z
ISO B1, B2, B3: 1000, 707, 500mm
z
880, 625, 440mm: 1230, 880, 625mm
z
860, 620, 435mm: 1210, 871, 620mm
z
34, 22, 17, 11inch: 1117, 863, 558,
431mm
z
30, 15inch: 1066, 533mm,
z
36, 24, 18, 12inch: 1219, 914, 609,
457mm
[System Settings]>[System Settings]>[Copy Settings]
Stamp Default Value Settings
The following items can be set:
This screen allows you to set the default value for
[Stamp 1] and [Stamp 2] that can be configured with
[More Features]>[Stamp].
Note • To use the Stamp feature, DW6035/6055-
Stamper-Key-AP (optional) is required.
Items Notes Factory
Default
Stamp 1 - Number Set the number for the stamp data to be registered
within the range of 1 to 99.
01
Stamp 1 - Color Select [Black] or [Gray] for the stamp color. Black
Stamp 1 - Position Select from [Auto], [Top of the Edge], and [Bottom
of the Edge].
Y: 0-9999mm
X: 0-999mm
Auto
Variable Length
Settings
Cancel
Save
+100
-100
mm
1189
(210-15000)
Variable Length
Settings
Page
1 of 6
1189mm
841mm
594mm
420mm
1030mm
1.ISO A0 Wide
2.ISO A1 Wide
3.ISO A2 Wide
4.ISO A3 Wide
5.JIS B1 Wide
Close
Items Current Settings
Close
Stamp
Stamp 1
Stamp 2
Off
Off
Stamp Default Value Settings
Page
1 of 3
01
Black
Auto
Off
Off
1.Stamp 1-Number
2.Stamp 1-Color
3.Stamp 1-Position
4.Stamp 1-Numbering
5.Stamp 1-Date
Close
Items Current Settings
To Next Page
Loading...
Need help?
General
