Cleaning & Maintenance
Cleaning cycle
Specify the cleaning cycle for the scanner inside.
The background color of the [After cleaning] counter in the [Consumable counters] screen changes to
yellow when the counter reaches 95% of the specified value for this item, and to red when the counter
reaches 100%.
Cycle (x1000 Sheets)
Specify the cleaning cycle in increments of 1000 sheets.
The factory default setting is "5".
Issue a cleaning time notification
Specify whether or not to display the cleaning instruction message.
When [Issue a cleaning time notification] is set to on, a notification can be displayed on on the
touch screen when the time for cleaning approaches.
[Issue a cleaning time notification] is set to off as the factory default.
Replacement of the Pick Roller
Specify the replacement cycle for the pick roller.
The background color of the [After Replacing the Pick Roller] counter in the [Consumable counters] screen
changes to yellow when the sheet count after replacing the pick roller reaches 95% of the specified value
for this item, and to red when the counter reaches 100%.
In addition, a notification can be displayed on on the touch screen when the time for replacing the
pick roller approaches.
Cycle (x 10000 Sheets)
Specify the replacement cycle for the pick roller in increments of 10,000 sheets.
The factory default setting is "20".
Replacement of the Brake Roller
Specify the replacement cycle for the brake roller
The background color of the [After Replacing the Brake Roller] counter in the [Consumable counters]
screen changes to yellow when the sheet count after replacing the brake roller reaches 95% of the
specified value for this item, and to red when the counter reaches 100%.
In addition, a notification can be displayed on
on the touch screen when the time for replacing the
brake roller approaches.
Cycle (x 10000 Sheets)
Specify the replacement cycle for the brake roller in increments of 10,000 sheets.
Scanner Settings (Touch Screen)
238
To Next Page
Loading...
Need help?
General
