Fujitsu fi-7300NX User Manual

Using an Image Scanning Application Started on the Touch Screen
This section explains about the basic flow of performing a scan using an image scanning application on the
computer started from the touch screen of the scanner.
In this case, there are necessary settings to be set in advance in order to perform a scan.
1 Button Settings (page 71)
Configure the settings for the touch screen buttons on the computer. Specify an application to be used for
image scanning for each button.
The buttons set in this step correspond with the buttons displayed in the touch screen of the scanner.
The button setting procedure varies depending on the connection method of the scanner.
● When establishing a connection via a USB cable
Display the [Devices and Printers] setting window for Windows, and set the buttons in [Scan properties] for
the scanner. For details, refer to Button Settings (page 71).
● When establishing a connection via Wi-Fi or a wired LAN
Set the buttons on fi-7300NX Button Event Manager. For details, refer to the help for fi-7300NX Button
Event Manager.
2 Settings on the Image Scanning Application
For some image scanning applications, settings on the image scanning application may be necessary.
For details, refer to the help for the image scanning application.
3 Operations on the Scanner (page 74)
Load documents on the scanner and press the touch screen button.
Pressing the button starts the image scanning application and starts scanning.
How to Perform a Basic Scan
70

Fujitsu fi-7300NX Specifications

General

Brand	Fujitsu
Model	fi-7300NX
Category	Scanner
Language	English