Scanning Documents Folded in Half
Sliding the feed mode switch to the left to switch the feed mode to Manual Single Mode allows you to scan a
document folded in half (a document of A3 or Double Letter size that is folded in half) as it is.
ATTENTION
When a document folded in half is scanned, the document may be fed skewed if the folded part is too thick.
1 Fold the document in half so that the sides to be scanned are facing out.
Fold it firmly and smooth out any creases.
Otherwise, it may cause the document to skew while feeding is in progress and result in a skewed image.
Example
2 Load the document folded in half in the ADF paper chute (feeder).
Various Ways to Scan
96
To Next Page
Loading...
Need help?
General
