When Establishing a Connection by Entering the Information for the Wireless
Access Point
1 In the screen for selecting a configuration method, select [Configure manually] and press the [Next]
button.
2 Check the setting items and the order of them, and then press the [Start] button.
The setting screen for a wireless access point is displayed.
3 Enter the information for the wireless access point.
Enter the following:
The information that you enter varies depending on the wireless access point that you want to connect to.
● Network name (SSID)
● Security protocol
● Security key
● Encryption method
● Authentication Method
● User ID
● Password
● Other necessary information for connecting to a wireless access point
4 After you finish entering the necessary information, press the [Next] button.
When the connecting process is complete, the connection result is displayed.
5 Press the [Next] button.
Specify the following items:
Refer to step 4 in When Connecting the Scanner via Wi-Fi (page 34).
Scanner Setup
40
To Next Page
Loading...
Need help?
General
