Hitachi Content Platform S Series User Manual

Refurbishing an HCP S30 Node
The components of an HCP S30 Node are:
•
Three through 16 enclosures. The first three enclosures each have 30
SATAhard disk drives and two SSDs installed in them. The rest of the
enclosures each have 32 SATAhard disk drives and no SSDs installed in
them.
•
Optionally, one or more upgrade kits that each consist of 28 SATA hard
disk drives.
•
A front panel and light pipe assembly for each enclosure
•
One set of enclosure mounting rails for each enclosure (two inner rails
and two outer rails).
•
Two IEC 320 C19 to IEC 320 C20 power cables for each enclosure.
•
Two server modules, each containing a riser card.
•
For each server module, these additional internal components:
¡
Two CPUs
¡
Two heatsinks
¡
Sixteen memory cards
¡
Two SSDs
¡
Two SAS PCIcards
¡
Optionally, a two-port Ethernet SFP+ PCI card
¡
A four-port Ethernet PCI card
Chapter 4: Refurbishing an HCP S30 Node
57
HCP S Series Node Refurbishment
4

Hitachi Content Platform S Series Specifications

General

Brand	Hitachi
Model	Content Platform S Series
Category	Server
Language	English