Related documents
The following documents contain additional information about HCP S Series
Nodes:
•
HCP S Series Node Help — This Help system contains information
about configuring, managing, and maintaining an HCP S Series Node.
The Help includes both information you need to effectively use the HCP
S Series Management Console and instructions for physical S Series
Node maintenance tasks that you manage from the Management
Console. The Help also contains a complete reference for using the HCP
S Series management API. Additionally, the Help includes release notes
for the current release of the product and copyright and license
information for third-party software distributed with or embedded in an
S Series Node.
•
HCP S Series Node APIReference — This book contains all the
information you need to use the HCP S Series management API. This
RESTful APIenables you to configure, monitor, and manage an S Series
Node programmatically.
•
HCP S10 Node Assembly and Configuration — This book contains
complete instructions for assembling an HCP S10 Node from its
component parts and for installing the HCP S Series software on the
assembled device. The book includes instructions for racking an S10
Node and for packing the components of an unracked S10 Node for
shipping. The book also includes information on troubleshooting the HCP
S Series software installation and instructions for replacing faulty
components.
•
HCP S10 Node On-site Setup — This book contains all the information
you need to deploy an HCP S10 Node at a customer site. The book
describes the site requirements and provides instructions for racking an
S10 Node that was ordered without a rack. The book explains how to
reconfigure an S10 Node for the customer computing environment and
how to make the necessary physical connections. The book also contains
information on configuring an S10 Node in the DNS and integrating an
S10 Node with Hi-Track
®
Monitor.
•
HCP S10 Node Maintenance — This book contains instructions for
maintaining the physical components of an HCP S10 Node, including
instructions for adding data drives to increase capacity and for replacing
faulty components. The book also contains instructions for upgrading
the HCP S Series software on an S10 Node.
Related documents
viii
Preface
HCP S Series Node Refurbishment
To Next Page
Loading...
Need help?
General