Hiwin E1 Series Manual

E1 Series Servo Drive Thunder Software Operation Manual Servo Drive Configuration
HIWIN MIKROSYSTEM CORP. 4-47
MD12UE01-2012
4.4 Parameters Setup
4.4.1 Brief introduction
Based on the classified servo drive Pt parameters list, users can set or compare the Pt parameters different
from factory default values. Besides, users can create, edit, save and load personalized parameters list.
Edit parameters
Users can edit, compare, save and load the servo drive related Pt parameters via Pt parameters page.
Create a servo drive parameters file
Users can quickly create a servo drive parameters file (*.prm) in the application environment, and load
servo drive parameters file (*.prm) in other environments.
Send the parameters to servo drive
Users can send the changed servo drive parameters to servo drive.
Reset drive
Users can send commands to reset servo drive via HMI. The effect is the same as power cycling servo
drive.
Set to factory default
Users can restore servo drive parameters to factory default.

Hiwin E1 Series Specifications

General

Brand	Hiwin
Model	E1 Series
Category	Servo Drives
Language	English