Hiwin E1 Series Manual

Monitoring E1 Series Servo Drive Thunder Software Operation Manual
7-46 HIWIN MIKROSYSTEM CORP.
MD12UE01-2012
7.6.2 Plot view
“Plot view” window displays the waveform generated by real-time data collection. Refer to Display
waveform to open “Plot view” window.
Figure 7.6.2.1
Table 7.6.2.1
No.
Item
Description
Reference
(1)
File
Open
Users can load waveform file (*.gpp) to “Plot view”
window.
section 7.6.2.1
Save
Users can save waveform as waveform file (*.gpp).
section 7.6.2.2
(2)
Set show mode
Users can set the waveforms to be displayed in “Plot
view” window.
section 7.6.2.3
(3)
Set maximum number of graph
views
Users can set the channels to be displayed in “Plot
view” window.
section 7.6.2.4
(4)
Zoom the area between cursors
Users can zoom in the area between cursors.
section 7.6.2.5
(5)
Undo zoom
Cancel zoom in the area between cursors.
section 7.6.2.6
(6)
Redo zoom
Zoom in the area between cursors again.
section 7.6.2.7
(7)
FFT
Users can perform FFT calculation on waveform.
--
(8)
Statistics table
It is the column which displays the status of
waveform.
section 7.6.2.8
(9)
Math operation
Users can perform math operation on waveform.
--
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)

Hiwin E1 Series Specifications

General

Brand	Hiwin
Model	E1 Series
Category	Servo Drives
Language	English