E1 Series Servo Drive Thunder Software Operation Manual Thunder Overview
HIWIN MIKROSYSTEM CORP. 1-5
1.4 Main window
Figure 1.4.1
Table 1.4.1
Display Thunder version number.
Function menu bar, including “File”, “Tools”, “Settings”, and “Help”.
Display system information, including servo drive’s type and firmware
version, motor type, encoder type, ESC’s type and firmware version.
Display alarm’s code and name.
Display warning’s code and name.
Display ready signal, including servo signal, drive signal, STO signal, servo
on signal, gantry mode signal.
Tool menu bar, including “Configuration Wizard”, “Parameters Setup”, “Test
Run”, “Homing Operation”, “Interface signal monitor”, “Performance
monitor”, “Scope”, “PDL”, “Multi-motion setting”, “Save parameters as a
file”, “Load parameters from file to drive”, “Save to drive” and “Reset drive”.
Display the page of each function.
To Next Page
Loading...
Need help?
General
