HP ProLiant DL580 Generation 2 User Manual

Connectors, LEDs, and Switches
System Maintenance Switch (SW4)
Figure 4-17 and Table 4-20 identify the system maintenance switch location and settings. The
system maintenance switch:
•
•
•
•
•
•
•
Disables the embedded video in the system (reserved)
Designates rack-mounted or tower configurations (reserved)
Enables or disables the diskette boot option
Enables or disables power-on password protection
Clears all configuration information from nonvolatile RAM
Prevents system nonvolatile RAM from accepting configuration changes
Prepares the server to accept ROMPaq disaster recovery operations
Figure 4-17: System maintenance switch (SW4)
4-24 HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide

HP ProLiant DL580 Generation 2 Specifications

General

Processor Socket	Socket 604
Storage Controller	Integrated Smart Array 6i Controller
Storage	SAS
Network	Integrated Dual Gigabit NICs
RAID Support	RAID 0, 1, 5
Expansion Slots	6 PCI-X slots
Power Supply	Redundant Power Supplies
Form Factor	4U Rack
Management	HP Integrated Lights-Out (iLO)
Operating System Support	Windows Server, Linux
Processor	Intel Xeon (up to 4 processors)
Drive Bays	Up to 6 hot-plug SCSI or SAS drives