HP ProLiant DL580 Generation 2 User Manual

Diagnostic Tools
Use the tools in Table 3-1 to diagnose problems, test hardware, and monitor and manage the
HP ProLiant DL580 Generation 2 server operations.
Table 3-1: Diagnostic Tools
Tool Description How to run the tool
Array Diagnostics Utility (ADU) ADU is designed to run on all
ProLiant systems that support HP
array controllers. ADU collects
information about the array
controllers in the system and
generates a list of detected
problems.
For a list of HP servers that support
ADU, follow the support link on
product website at www.hp.com.
For a complete list of ADU error
messages, refer to the HP Servers
Troubleshooting Guide.
Automatic Server Recovery-2
(ASR-2)
ASR-2 automatically restarts the
server after a catastrophic operating
system failure.
With ASR-2, you have two recovery
options:
• Available Recovery provides
software error recovery and
environmental recovery.
• Unattended Recovery logs the
error information to the IML,
resets the server, and tries to
restart the operating system.
Run RBSU and set ASR-2 to enable
this tool.
Diagnostics Diagnostics tests and verifies
operation of HP hardware. If
Diagnostics finds a hardware failure,
it isolates the replaceable part, if
possible.
Access Diagnostics when POST
detects a system configuration error.
For a complete list of POST error
messages, refer to the HP Servers
Troubleshooting Guide. Diagnostics
can be run from the SmartStart CD
or downloaded by following the
support link on the product website
at www.hp.com.
Insight Manager 7 Insight Manager 7 is a client/server
application used to remotely manage
HP hardware in a network
environment. Insight Manager
reports hardware fault conditions
(both failure and pre-failure) and
collects data for reporting and
graphing.
For more information on viewing and
printing the event list, refer to the
Management CD, the Insight
Manager User Guide, or in the HP
ProLiant DL580 Generation 2 Server
Setup and Installation Guide.
Integrated Lights-Out (iLO) iLO is a remote management port
that can be accessed through a
dedicated Lights-Out port on the rear
panel of the server. Accessed
through a standard browser from
anywhere, the iLO capabilities will
not require any unique software
applications to use.
For more information on iLO, refer to
the Integrated Lights-Out User Guide
on the Documentation CD.
3-2 HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide

HP ProLiant DL580 Generation 2 Specifications

General

Brand	HP
Model	ProLiant DL580 Generation 2
Category	Server
Language	English