HP ProLiant DL580 Generation 2 User Manual

Removal and Replacement Procedures
7. Using a flathead screwdriver, disengage the locking tabs on the bezel from underneath
the chassis (1).
8. Remove the front bezel (2).
Figure 2-31: Disengaging the locking tabs and removing the front
bezel
Repeat steps 1 through 8 to replace the front bezel.
2-44 HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide

HP ProLiant DL580 Generation 2 Specifications

General

Processor Socket	Socket 604
Storage Controller	Integrated Smart Array 6i Controller
Storage	SAS
Network	Integrated Dual Gigabit NICs
RAID Support	RAID 0, 1, 5
Expansion Slots	6 PCI-X slots
Power Supply	Redundant Power Supplies
Form Factor	4U Rack
Management	HP Integrated Lights-Out (iLO)
Operating System Support	Windows Server, Linux
Processor	Intel Xeon (up to 4 processors)
Drive Bays	Up to 6 hot-plug SCSI or SAS drives