HP ProLiant DL580 Generation 2 User Manual

Removal and Replacement Procedures
Replacing the Access Panels
To replace the access panels:
1. Place the front access panel on top of the server, and line up the guide marks on the front
access panel with the corresponding server guide marks.
2. With even pressure, push the front access panel down and slide it toward the front of the
server into the fitted slots.
Figure 2-9: Replacing the front access panel
HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide 2-11

HP ProLiant DL580 Generation 2 Specifications

General

Brand	HP
Model	ProLiant DL580 Generation 2
Category	Server
Language	English