HP ProLiant DL580 Generation 2 User Manual

Removal and Replacement Procedures
Processor Air Baffle
To remove the processor air baffle:
1. Power down the server. Refer to “Power ing Down the Server” in this chapter.
2. Extend the server from the rack. Refer to “Extending the Rack from the Server” in this
chapter.
3. Open the rear access panel. Refer to “Op ening and Removing the Rear Access Panel” in
this chapter.
4. Remove memory board 1. Refer to “Rem oving a Memory Board” in this chapter.
5. Squeeze both ends of the baffle to release the tabs (1).
6. Lift the processor air baffle from the chassis (2).
Figure 2-33: Removing the processor air baffle
Reverse steps 1 through 6 to replace the processor air baffle.
2-46 HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide

HP ProLiant DL580 Generation 2 Specifications

General

Brand	HP
Model	ProLiant DL580 Generation 2
Category	Server
Language	English