HP ProLiant DL580 Generation 2 User Manual

Troubleshooting
Problems After Initial Boot
Once the server has passed POST, you may still encounter errors, such as an inability to load
the operating system. Use Table 5-7 to troubleshoot server installation problems that occur
after the initial boot.
Refer to the HP Servers Troubleshooting Guide for more information of software problems.
Table 5-7: Problems After Initial Boot
Problem Possible Reasons Possible Solutions
ProLiant Essentials
Foundation Pack requirement
not performed.
Check the ProLiant Essentials Release Notes
provided in the ProLiant Essentials Online
Reference Information on the ProLiant
Essentials Foundation Pack.
CD-ROM drive is not properly
seated.
Reseat CD-ROM drive.
Insufficient memory is
available.
A rare Insufficient Memory message may
display the first time ProLiant Essentials is
booted on certain unconfigured systems. Cold-
boot the machine with the ProLiant Essentials
Foundation Pack inserted in the CD-ROM drive
to correct the problem.
System cannot
load ProLiant
Essentials
Foundation
Pack.
Existing software is causing
conflict.
Run the System Erase Utility. Read the
Caution at the end of this table. Refer to the
instructions in the HP Servers Troubleshooting
Guide.
continued
HP ProLiant DL580 Generation 2 Server Maintenance and Service Guide 5-9

HP ProLiant DL580 Generation 2 Specifications

General

Brand	HP
Model	ProLiant DL580 Generation 2
Category	Server
Language	English