KEB F6 User Manual

Preface
© 2024 KEB America, Inc.
21
EN 60721-3-3
Classification of environmental conditions - Part 3-3: Classification of groups of
environmental parameters and their severities - Stationary use at weather-protected
locations
EN 61000-2-1
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of
the environment - Electromagnetic environment for low-frequency conducted
disturbances and signalling in public power supply systems
EN 61000-2-4
Electromagnetic compatibility (EMC) - Part 2-4: Environment; Compatibility levels in
industrial plants for low-frequency conducted disturbances (IEC 61000-2-4); German
version EN 61000-2-4
EN 61000-4-2
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques -
Electrostatic discharge immunity test (IEC 61000-4-2); German version EN 61000-4-2
EN 61000-4-3
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques -
Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3);
German version EN 61000-4-3
EN 61000-4-4
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques -
Electrical fast transient/burst immunity test (IEC 61000-4-4); German version EN
61000-4-4
EN 61000-4-5
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques -
Surge immunity test (IEC 61000-4-5); German version EN 61000-4-5
EN 61000-4-6
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques -
Immunity to conducted disturbances, induced by radio-frequency fields (IEC 61000-4-
6); German version EN 61000-4-6
EN 61000-4-34
Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques
- Voltage dips, short interruptions and voltage variations immunity tests for equipment
with mains current more than 16 A per phase (IEC 61000-4-34); German version EN
61000-4-34
EN 61508-1...7
Functional safety of electrical/electronic/programmable electronic safety-related
systems  Part 1...7 (VDE 0803--
EN 62061
Safety of machinery - functional safety of electrical, electronic and programmable
electronic safety-related systems (VDE 0113-50, IEC 62061)
EN ISO 13849-1
Safety of machinery - safety-related parts of control systems - Part 1: General
principles for design (ISO 13849-1); German version EN ISO 13849-1
Standards Applicable to Drive Controller Environment
CSA B44.1/
ASME A17.5
Elevator and escalator electrical control equipment
DGUV regulation 3
Electrical installations and equipment
DIN EN 60939-1
Passive filter units for electromagnetic interference suppression - Part 1: Generic
specification (IEC 60939-1:2010); German version EN 60939-1:2010

KEB F6 Specifications

General

Brand	KEB
Model	F6
Category	Inverter
Language	English