FIGURE 8-3. 930E PISTON/SPINDLE PUSHER STRUCTURE
DIMENSION “A” = 1.37 in. - Plate Bolt Hole Diameter DIMENSION “F” = 5.25 in. - Pusher Cylinder Height
DIMENSION “B” = 21.62 in. - Plate Outside Diameter (O.D.) DIMENSION “G” = 12.37 in. - Pusher Cylinder O.D.
DIMENSION “C” = 19.25 in. - Bolt Circle Diameter (B.C.) DIMENSION “H” = 9.00 in. - Pusher Cylinder I.D.
DIMENSION “D” = 2.00 in. - Plate Inside Diameter (I.D.) DIMENSION “I” = 1.75 in.- Cylinder Wall Thickness
DIMENSION “E” = 1.37 in. - Plate Thickness
NOTE: Surface A-A must be parallel to B-B
M08012 9/99 Special Tools M8-7
To Next Page
Loading...
Need help?
General
