Lenze i55 Series User Manual

11.3.3.2 Using the smartphone as "Smart Keypad"
In the default seng, the WLAN sengs of the inverters are used. If the WLAN module is
plugged onto another inverter, the WLAN connecon must be set up again because the
replugging causes a change of the network name.
For using the smartphone as "Smart Keypad", the WLAN module can be congured such that
the WLAN sengs are saved locally in the WLAN module and only these sengs are used. In
this "standalone" mode, the WLAN module remains permanently coupled to the smartphone
because aer replugging onto another inverter, the login data for the WLAN network (SSID
and password) is the same:
Inverter 1 Inverter 2
SSID:
"Own_name"
Access Point
Inverter 1 Inverter 2
SSID:
"Own_name"
Access Point
Smart
Keypad
Smart
Keypad
①
WLAN module is plugged onto the inverter 1. Aer the connecon to the smartphone has been established, the inverter 1 can be diagnosed
or parameterised with the Lenze Smart Keypad App.
②
WLAN module is plugged onto the inverter 2. Aer the WLAN network is restarted, a connecon is established again to the smartphone
because the WLAN sengs are idencal. Now, the inverter 2 can be diagnosed or parameterised with the Lenze Smart Keypad App.
How to congure the WLAN module for a "Smart Keypad" use:
Requirements:
•
The WLAN sengs of the inverter can be accessed via the Lenze Smart Keypad App
or »EASY Starter«.
1.Dene your own network name (SSID) in 0x2441:007.
2.Dene your own password in 0x2441:008.
3.Set the selecon "Save sengs in WLAN module [11]" in 0x2440.
The dened network name and the password are saved locally in the WLAN module. The
WLAN network is restarted with the current sengs.
If the WLAN module is then plugged onto another inverter, the sengs that are locally saved
in the WLAN module are used (irrespecve of the WLAN sengs of the inverter).
•
The acve mode ("Inverter" or "Standalone") is displayed in 0x2442:004.
•
In order to return to the standard mode "Inverter", the selecon "Restart with default val-
ues [2]" must be set in 0x2440.
Addional funcons
Wireless LAN (WLAN)
WLAN access point mode
432

Lenze i55 Series Specifications

General

Brand	Lenze
Model	i55 Series
Category	Inverter
Language	English