122 Matrix SETU ATA211 V1 System Manual
Call Forward Timer:
• The call will be forwarded to the programmed destination, on expiry of the timer called 'Call Forward
Timer'.
• This timer is applicable only when option 'Call Forward- When No Reply' is selected. The range of Call
Forward Timer is 01 to 99 seconds. By default it is 45 seconds.
Call Waiting:
• This feature notifies you of another incoming call, when you are busy on a call. You will get beeps during
speech when you have waiting call.
• Waiting call is the incoming call, received during an active call. Select 'Set' for this if you want to get
indication (beeps), for the waiting call. Select 'Cancel' if you want to disable the feature. If the feature is
disabled, you will not get beeps for the waiting call and the waiting call will get rejected. By default, Call
Waiting is enabled.
Do Not Disturb:
• DND feature is useful when you do not want to receive any incoming calls. When DND feature is set on
FXS port, all IC calls on FXS port will be rejected by ATA211, but OG calls can be made as usual.
• Select the option 'Set' to enable DND. If DND is disabled, all incoming calls will be allowed by the ATA. By
default, 'DND' is disabled.
Relevant Topics:
1. “Call Features” 43
2. “Class of Service” 82
3. “Managing Calls” 38
To Next Page
Loading...
Need help?
General
