Matrix SETU ATA211 V1 System Manual 57
CHAPTER 5
Configuring SETU ATA211
In this chapter, you will learn the configuration of various parameters of ATA211.
Admin Password
Admin is a person who installs, configures and maintains the SETU ATA211. Logging into Jeeves using Admin
Password will allow you to access all the parameters of ATA211. Thus, the system allows you to change or modify
or default the Admin Password.
How to program?
Open the Web Jeeves and click on 'Admin Password' link. (Only Admin can access this Webpage). The Webpage
will be as shown below:
Change the Admin Password using Jeeves:
You can change Admin Password by following the steps given below:
• In 'Old Password' field enter the current password; enter new password in 'New Password' field and retype
new password in 'Retype To Confirm' field.
• Password can be of maximum 4 digits. Only digits 0-9 are allowed.
Whenever Admin changes the Admin Password from Jeeves, the Admin will be logout from the Jeeves as
a confirmation that in ATA211, the password has been changed.
Now, if you forget the password, you will be required to default the password. This can be done by
following:
• Default the Admin Password using Access Code.
To Next Page
Loading...
Need help?
General
