Matrix SETU ATA211 V1 System Manual 31
Checking the Status
SETU ATA211 facilitates you to check whether you have installed it properly or not by displaying the status of all the
important parameters such as LAN Port, WAN Port, SIP Accounts and Auto Configuration on the Status page in the
Web Jeeves and also by indicating port status through LEDs. Refer sub-topic “LEDs” in Knowing SETU ATA211 to
check port status through LEDs.
You can also check Registration status of SIP Accounts on LCD display of the Phone connected to FXS
port by using the command. Refer appendices “System Commands”.
You can check the status of any of these parameters through Jeeves as mentioned below: Open the Web Jeeves of
SETU ATA211 and click on 'Status' link. (both Admin and User can access this Web page). The Web page will be as
shown below:
To Next Page
Loading...
Need help?
General
