Matrix SETU ATA211 V1 System Manual 7
Remarks:
1. The gateway supports that all the three SIP Accounts can be used for Peer to Peer calling OR can be used
for Proxy Calling. It also supports to use two SIP Accounts for Proxy calling and to use third SIP Account
for Peer to Peer calling.
2. User can know the registration status of SIP Account1 and SIP Account2 on LED. But, if user is using SIP
Account3 also for proxy calling, registration status for SIP Account3 can only be known from the 'Status
page' of Web Jeeves or issuing command from SLT. Refer appendices “System Commands” for display of
status using command.
FXO Continuously ON Indicates that FXO port is either OFF-hook or in speech during IC
Call/OG Call.
Blinks fast 200ms ON,
200ms OFF
Indicates that FXO port is in Error state during IC/OG call.
Blinks slow 500ms ON,
500ms OFF
Indicates that FXO port is Ringing for IC Call or Number is being
dialed for OG call (After end of dialing).
Continuously OFF Indicates that FXO port is ON-hook.
SIP1 Continuously ON Indicates that SIP1 is enabled and is registered with the SIP server
or 'Active' status of SIP Account.
Blinks fast 200ms ON,
200ms OFF
Indicates that SIP1 is enabled but not registered with the SIP server
(SIP is configured as proxy).
Blinks slow 500ms ON,
500ms OFF
Indicates that SIP1 is enabled but not registered with the SIP server
(SIP is configured for P2P calling).
Continuously OFF Indicates that SIP1 is disabled.
SIP2 Continuously ON Indicates that SIP2 is enabled and is registered with the SIP server
or 'Active' status of SIP Account.
Blinks fast 200ms ON,
200ms OFF
Indicates that SIP2 is enabled but not registered with the SIP server
(SIP is configured as proxy).
Blinks slow 500ms ON,
500ms OFF
Indicates that SIP2 is enabled but not registered with the SIP server
(SIP is configured for P2P calling).
Continuously OFF Indicates that SIP2 is disabled.
SIP3 - (Refer Remarks)
LED Status Meaning
To Next Page
Loading...
Need help?
General
