MIMAKI CF-0912 User Manual

— 4.11 —
SETTING THE UNIT TO BE USED FOR INDICATION
[MODE SET] > [UNIT]
The unit to be used when indicating numerics on the LCD is specified.
Set values
mm: Numerics are indicated in millimeters.
inch: Numerics are indicated in inches.
1 Press the
PAGE
+
key several times
until the LCD indicates page 3 of the
LOCAL MENU.
2 Select the [MODE SET].
3 Press the
PAGE
+
key several times
until the LCD indicates page 5 of the
[MODE SET].
4 Select one of the following as a setting
for the [UNIT].
mm, inch
5 Enter the input values.
Press the
END
key to enter the input
values. If you do not enter the input
data, press the
C E
key.
[ LOCAL ] 1 / 4
TOOL SELECT ———>
CONDITION ———>
TEST CUT ———>
[ LOCAL ] 3 / 4
INTERFACE ———>
MODE SET ———>
SELF TEST ———>
< MODE SET > 1 / 5
Z STROKE ∗7 mm >
MULTI–PASS ———>
VACUUM ∗AutoOFF>
PAGE
+
F2
+
END
< MODE SET > 5 / 5
PEN ASIGN ———>
RESERVE
UNIT ∗ mm >
F3
+
< MODE SET > 5 / 5
PEN ASIGN ———>
RESERVE
UNIT inch >
[ LOCAL ] 3 / 4
INTERFACE ———>
MODE SET ———>
SELF TEST ———>
PAGE
+

MIMAKI CF-0912 Specifications

General

Brand	MIMAKI
Model	CF-0912
Category	Plotter
Language	English