MR ETOS TD User Manual

9 Visualization
Maschinenfabrik Reinhausen GmbH 2020286 4453918/14 ENETOS
®
TD
9.35.2 Software
Under Software, you can display the version status of the software compo-
nents of the device.
Figure216: Information about the device's software
► Go to Information > System > Software.
9.35.3 Parallel operation
In the parallel operation menu, you can display information about the de-
vices that are connected by CAN bus.
Description
Parallel operation status:
▪ Gray = Independent mode
▪ Blue = Parallel operation is active
▪ Red = Parallel operation error
CAN addr. CAN bus address
Grp. Parallel operation group
Method Active parallel operation method
Current tap position
U[V] Voltage
I_p [%] Active current
I_q [%] Reactive curr.
Blocking:
▪ Gray: Parallel operation not blocked
▪ Red: Parallel operation blocked
Table91: Information about parallel operation

MR ETOS TD Specifications

General

Brand	MR
Model	ETOS TD
Category	DC Drives
Language	English