MR ETOS TD User Manual

9 Visualization
Maschinenfabrik Reinhausen GmbH 2020288 4453918/14 ENETOS
®
TD
Option Description
Event memory All event memory entries.
Recorder Measured value memory export.
Parameter list Parameter list with descriptive text and values (min, max, current).
Event list Complete list of all possible events.
SCADA config-
uration
Control system configuration (e.g. ICD file for IEC61850).
Operating In-
structions
Operating instructions, protocol specifications.
Settings Configuration of parameters and events.
Data point con-
figuration
Data point configuration of the control system.
Sensor bus de-
vice descrip-
tion
Sensor description of the sensors for MR sensor bus that have
been created with the sensor editor.
Service data Device data for support through the Maschinenfabrik Reinhausen
GmbH Technical Service department
Security log Logbook of all instances of access and changes relating to secu-
rity.
RADIUS dictio-
nary
Dictionary for importing on a RADIUS server.
Table93: Exporting data
Only remove the USB stick once the data transfer is complete. Otherwise
data may be lost.
To export data, proceed as follows:
1. Go to Settings > Export.
2. Select the desired option for the export.
9.36.2 Importing data (software version 3.44 and later)
You can import the following data:
Option Description
System image Complete image of the system (software and configura-
tion), with or without history.
Settings All device settings:
▪ Parameter settings
▪ Event settings
▪ Administrative settings (users, access rights)
The settings can also be imported from another device.

MR ETOS TD Specifications

General

Brand	MR
Model	ETOS TD
Category	DC Drives
Language	English