9 Visualization
Maschinenfabrik Reinhausen GmbH 2020 2874453918/14 EN ETOS
®
TD
Figure217: Parallel operation
► Go to Information > On-load tap-changer regulator > Parallel opera-
tion.
9.36 Import/export manager
The device is equipped with an import/export manager, which can be used
to export and import various data.
To transfer the data, the following options are available:
Option Description
USB Data transfer via USB port on rear of CPU I assembly.
PC Data transfer via PC using web-based visualization.
Table92: Data transfer options
9.36.1 Exporting data
The device stops logging the measured value recorder data for the duration
of the export.
You can export the following data from the device, depending on your device
configuration:
Option Description
System image Complete image of the system (software and configuration). If you
are using the option "with history", all of the event memory entries
are also exported.
System config-
uration
System configuration
Customer pro-
gram
Customer program export (TPLE).
To Next Page
Loading...
Need help?
General