248
Programming Console Function
Section 6-12
Differences with Respect to Programming Consoles
S Programs cannot be stored (recorded) or read (replayed). If it is necessary to
store or read a program, use a peripheral tool.
S It is not possible to adjust the volume of the key press sound. Whether or not the
key press sound sounds is determined by the setting for the “Key Press Sound”
memory switch of the NT31/NT31C. It sounds when the setting is “ON” and
does not when the setting is “OFF” (page 191).
S If an error occurs when using the programming console function, an error screen
is displayed. Whether or not the buzzer sounds at this time is determined by the
setting for the “Buzzer Sound” memory switch of the NT31/NT31C (page 192).
Reference: If, when using the programming console function, “Communication Condition Set-
ting for RS-232C port” in the PC system setting area is changed, for example by
memory clearance, a communication error occurs and it becomes impossible to
use the programming console function.
To Next Page
Loading...
Need help?
General
