442
Inputting Character Strings
Section 7-14
Opening/Closing and moving a window by the operation of window control area
While running the NT31/NT31C, by writing window screen number or X, Y coordi-
nate of window position (bottom left) at window control area from the host, open-
ing/closing, moving window are possible.
Window controlarea cancontrol both globalwindow and local window. Fordetails,
refer to 8--4 “Display and Control of Window” (page 490).
Window control area
Bottom left coodinate (60, 179)
Local window 1
NT31/NT31C
PC
0125
0060
0179
Local window 1 open
(Window screen No.125)
Y coordinate
X coordinate
Screen No.
7-14-5 Size and display position of a window
Size of a window can be specified freely by 20 dot unit when creating a window
screen. (Minimum window size: 20
20)
It is possible to display a window at a different position from where it was created,
or to move a window. (Distance of movement has to be multiple of 20 also.)
Example:
Orginal position Destination Position
Move
Multiple of 20
Multiple of 20
7-14-6 Changing the displaying order of windows
When multiple windows are displayed on a base screen, the part of the windows
may overlap with each other. To move a window which is covered by the other
window to the front, follow the methods below.
S Changing the displaying order by opening or moving operation of the window
The window which was opened or moved last comes to the front.
Window opens
Pop-up window/keyboard
touch switch
Open
Window already opened
To Next Page
Loading...
Need help?
General
