Poly P014 User Manual

Configuring Network Settings
Network settings include the G7500 and Studio X series system primary (wired LAN) and secondary (Wi-Fi) network
configurations.
Configuring Wired LAN Settings
You can set the wired LAN properties for your G7500 and Studio X series system.
Automatically Obtain IPv4 Address Settings
Your system by default gets its IP address information automatically. If this behavior is turned off, you can turn it back on.
You must have a DHCP server deployed in your environment.
Task
1 In the system web interface, go to Network > LAN Network > IP Addresses.
2 For IP Address, select Obtain IP address automatically.
Some of your IP address settings populate automatically and are read-only.
3 Select Save.
Manually Configure IPv4 Address Settings
You can manually specify the system’s IPv4 address settings.
Task
1 In the system web interface, go to Network > LAN Network > IP Addresses.
2 For IP Address, select Enter IP address manually.
3 Configure the following settings:
Setting
Description
Your IP Address is Specifies the system IP address.
Subnet Mask Specifies the subnet mask assigned to your system.
Default Gateway Specifies the default gateway assigned to your system.
4 Select Save.
Automatically Obtain IPv6 Address Settings
You can enable your system to use IPv6 addresses and get IP address information automatically.
You must have a DHCP server deployed in your environment.
Warning: If your network environment only supports IPv6, you must manually configure a static IPv4 address. For
example, manually configure the IPv4 IP address to 192.168.0.4.
Task
1 In the system web interface, go to Network > LAN Network > IP Addresses.
2 Select the Enable IPV6 checkbox.
3 For IP Address, select Obtain IP address automatically.
4 Optional: Select the Enable SLAAC checkbox to enable the system to use stateless address autoconfiguration (SLAAC)
to automatically obtain IP address.
35

Poly P014 Specifications

General

Brand	Poly
Model	P014
Category	Conference System
Language	English