Poly P014 User Manual

Setting Description
Enable Audio Mute Reminder Specifies if the system displays a notification that the
microphones are muted when it detects someone speaking.
Audio Input
You can connect several types of microphones to your system.
The following audio inputs are supported:
• IP-based Poly microphone peripherals (for the G7500 system only):
– Poly IP Table Microphone
– Poly IP Ceiling Microphone
– Poly Microphone IP Adapter
• X70 Microphones, X50 Microphones, and X30 Microphones: The built-in microphones that come with the Studio X70,
Studio X50, and Studio X30 systems.
• Polycom RealPresence Debut Expansion Microphone (for the Studio X50 system only)
• 3.5 mm (not available on Studio X30 system): 3.5 mm stereo input used to share audio from a device or microphone.
Depending on your setup, you can specify if sound from this input plays in the room and at far sites or just at far sites.
• HDMI: Used to share audio (along with content) from a device. Sound from this input plays in the room and at far sites.
• Trio Microphones: Available when paired with a Poly Trio system.
Configure IP Microphones
You can configure IP table and ceiling microphone settings for your G7500 and Studio X series system.
The Studio X50 and Studio X30 don’t support IP microphones.
Task
1 In the system web interface, go to Audio/Video > Audio > Audio Input.
2 Configure the following settings (your changes save automatically):
Setting
Description
Stereo Mode Positions the audio input within the left and right channels. Left
sends all of the audio to the left channel. Right sends all of the
audio to the right channel. For Poly table microphone and
ceiling microphones, Left+Right sends audio from one
microphone element to the left channel and audio from a
second element to the right channel.
Autorotation
Specifies whether the system uses autorotation for Poly
microphones. If you enable this feature, the system
automatically assigns left and right channels for the microphone
based on the sound it senses from the left and right speakers.
Configuring the Microphone Adapter
The video system automatically configures Poly Microphone IP Adapter when you pair it.
The Studio X50 and Studio X30 systems don’t support the microphone adapter.
Note the following when using the microphone adapter:
• You can’t use Poly IP table and ceiling microphones.
• Polycom StereoSurround isn’t available.
• The audio input level (mono channel meter) displays in the local interface and system web interface.
76

Poly P014 Specifications

General

Brand	Poly
Model	P014
Category	Conference System
Language	English