Polycom realpresence group series Administrator's Manual

Security
Polycom, Inc. 134
Remote Access
Remote access means using a RealPresence Group system in some way other than through the local
interface, such as by using the web, a serial port, or telnet. A session is an instance of a user connected to
the system through one of these interfaces. Sessions include an indication of how you are logged on to the
RealPresence Group system, such as the local interface, web interface, telnet, or serial API.
To configure remote access settings:
1 Do one of the following:
 In the local interface, go to Settings > Administration > Security > Remote Access.
 In the web interface, go to Admin Settings > Security > Global Security > Access.
2 Configure the following settings. Not all settings are available on both interfaces. The visibility of
some settings is affected by the type of security profile your system uses.
User Room Password Specifies the password for the local user account used when logging in to the
system locally.
The password cannot contain spaces or more than 40 characters.
Passwords are case sensitive.
User Remote Access Password Specifies the password for the local user account used when logging in to the
system remotely.
The password cannot contain spaces or more than 40 characters.
Passwords are case sensitive.
Note: Enabling Maximum Security Profile requires new ID values
When you configure the RealPresence Group system to use the Maximum Security Profile, the
system forces you to change the following settings from their default values:
• Admin account User Id
• User account User Id
• Admin room password
• Admin remote access password
• User room password
• User remote access password
Setting Description
Enable Network Intrusion
Detection System (NIDS)
(web interface only)
Activates the ability to log entries to the security log when the system
detects a possible network intrusion. This setting is enabled or disabled by
default based on the security profile, but can be changed.
Enable Web Access Specifies whether to allow remote access to the system by using the web
interface.
Allow Access to User Settings Specifies whether the User Settings screen is accessible to users through
the local interface. For more information about user access settings, refer
to Manage User Access to Settings and Features.
Setting Description

Polycom realpresence group series Specifications

General

Brand	Polycom
Model	realpresence group series
Category	Conference System
Language	English