Polycom realpresence group series Administrator's Manual

Security
Polycom, Inc. 135
Manage User Access to Settings and Features
You can allow users to change common user preferences by providing access to the User Settings screen.
Restrict to HTTPS Specifies that the web server is accessible only over a secure HTTPS port.
Enabling this setting closes the HTTP port and so disables redirects of
sessions from HTTP to HTTPS (all access must be initiated as HTTPS).
Web Access Port (HTTP) Specifies the port to use when accessing the system using the Polycom
RealPresence Group system web interface using HTTP.
If you change this from the default (port 80), specify a port number of 1025
or higher, and make sure the port is not already in use. You will need to
include the port number with the IP address when you use the Polycom
RealPresence Group system web interface to access the system. This
makes unauthorized access more difficult.
If Restrict to HTTPS is enabled, the Web Access Port setting is
unavailable.
Enable Telnet Access Specifies whether to allow remote access to the system by telnet.
Enable SSH Access Specifies whether to allow SSH access. For more information about this
setting, refer to Secure API Access.
API Port Specifies the port for API access. Select port 23 or 24.
If you set the API port to port 23, the diagnostics port changes to port 24.
Enable Diagnostics Port Idle
Session Timeout
Specifies whether to allow the diagnostics port to time out at the configured
time interval or not. The timeout setting is set under Idle Session Timeout
in Minutes.
Enable API Port Idle Session
Timeout
Specifies whether to allow the API port to time out at the configured time
interval or not. The timeout setting is set under Idle Session Timeout in
Minutes.
Enable SNMP Access Specifies whether to allow remote access to the system by SNMP.
Allow Video Display on Web
(local interface only)
Specifies whether you can use the Polycom RealPresence Group system
web interface to view the room where the system is located, or video of
calls in which the system participates.
Note: This feature activates both near site and far site video displays in
Web Director.
Lock Port after Failed Logins For information about this setting, refer to Port Lockout.
Enable Whitelist Specifies whether to enable a whitelist. For more information about this
setting, refer to Enable a Whitelist and Add IP Addresses.
Idle Session Timeout in Minutes
(web interface only)
Specifies the number of minutes your web interface session can be idle
before the session times out.
Maximum Number of Active
Sessions
(web interface only)
Specifies the maximum number of users who can be logged in to and using
your system through telnet or the web interface at the same time.
Setting Description

Polycom realpresence group series Specifications

General

Brand	Polycom
Model	realpresence group series
Category	Conference System
Language	English