Polycom realpresence group series Administrator's Manual

Networks
Polycom, Inc. 41
Configure LAN Properties
You can configure LAN properties for the RealPresence Group systems and for Polycom Touch Control
devices. Refer to the following section and Configure the Polycom Touch Control LAN Properties.
To configure RealPresence Group System LAN properties:
» Do one of the following:
 In the local interface, go to Settings > Administration > LAN Properties.
 In the web interface, go to Admin Settings > Network > LAN Properties.
Configure IP Address (IPv4) Settings
Configure the following IP Address (IPv4) settings on the LAN Properties screen.
Configure IP Address (IPv6) Settings
Configure the following IP Address (IPv6) settings on the LAN Properties screen.
Setting Description
IP Address Specifies how the system obtains an IP address.
• Obtain IP address automatically—Select if the system gets an IP address from a
DHCP server on the LAN.
• Enter IP address manually—Select if the IP address will not be assigned
automatically.
Your IP Address is If the system obtains its IP address automatically, this area displays the IP address
currently assigned to the system.
If you selected Enter IP address manually, enter the IP address here.
Subnet Mask Displays the subnet mask currently assigned to the system.
If the system does not automatically obtain a subnet mask, enter one here.
Default Gateway Displays the gateway currently assigned to the system.
If the system does not automatically obtain a gateway IP address, enter one here.
Setting Description
Enable IPv6 Enables the IPv6 network stack and makes the IPv6 settings available.
IP Address Specifies how the system obtains an IP address.
• Obtain IP address automatically—Select if the system gets an IP address from a
SLAAC or a DHCP server on the LAN.
• Enter IP address manually—Select if the IP address will not be assigned
automatically.
Enable SLAAC Specifies whether to use stateless address autoconfiguration (SLAAC) instead of DHCP
to automatically obtain an IP address.
Using DHCP to get the IP address requires a DHCP server to get the address from the
network, but with SLAAC, existing routers help the system get the IP address from the
network.

Polycom realpresence group series Specifications

General

Brand	Polycom
Model	realpresence group series
Category	Conference System
Language	English