System Menu
The System Menu allows you to set the printer's basic functions. Although you can operate the printer using
the default settings, you can also change its settings to better suit your printing needs. Changes made to
settings remain effective after power off.
Changing the system menu
Follow the procedure below to change the settings for Energy Saver Timer.
1. Press the [Menu] key.
The menu screen appears.
2. Press [ ] or [ ] key to display [System], and then press the [OK] key.
3. Press [ ] or [ ] key to display [Energy Saver 2], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Energy Saver Timer], and then enter the [OK] key.
5. Press the [ ] or [ ] key to select the lead time needed to switch to the Energy Saver mode.
6. Press the [OK] key.
Wait for one second. The Energy Saver 2 screen appears.
7. Press the [Online] key.
The initial screen appears.
System menu parameters
This section explains about parameters that can be set on the System menu.
Print Error Report
Select whether or not to print an error report when a printer error or memory error occurs.
• Off
5. Making Printer Settings Using the Control Panel
174
To Next Page
Loading...
Need help?
General